Tutorial: Valentine's Mug Rug (Go! Ahead and Show a Little Love blog hop)

Let me start by saying that I love "Flo", my Accuquilt GO! Before I had my Go! I had never ventured much past squares and rectangles in my quilts.. but now I've progressed to curves (LOVE my Drunkard's Path die!), tumbler blocks and even little Sunbonnet Sue!

For my Go! Ahead and Show a Little Love blog hop project I decided to use dies that I'd consider basic essentials - the Value die (which comes with the Go! - and is available for separate purchase with the Go! Baby) and the 2.5" strip die.

If you don't have an Accuquilt cutter, you can still make this project using your acrylic rulers & rotary cutter. :)

You will need:

Main Fabric 

Background Fabric

Border Fabric

Backing Fabric

Binding Fabric (this can be the same as the Main Fabric)

Batting

(Fabric estimates will depend on how many mug rugs you are planning to make... a fat quarter of each fabric should be enough to make 3-4 mug rugs.)

Step 1: Using the Value die cut-

• 8x 2.5" HSTs (Half Square Triangles) of the Main fabric
• 8x 2.5" HSTs of the Background fabric
• 2x 2.5" Squares of the Main fabric
• 2x 2.5" Squares of the Background fabric

Lay out your pieces, making sure directional prints are going the right way!

 Step 2: Pair the HSTs so that you have one Main Fabric and one Background Fabric per pair. Open out and press seams according to personal preference.

 Step 3: Join "square" blocks as shown below. You should end up with 6x rectangular blocks. Press seams.

 Step 4: Sew rectangle blocks together to form two columns, pressing seams as you go (quick, we need to mend that broken heart!)

Step 5: Join the two halves of your heart together!

 Step 6: Using the 2.5" Strip Die cut a WOF (Width of Fabric) strip of your Border Fabric. I have marked my die so that I can then place my 2.5" strip down the centre of my die and turn it into a 1.25" strip, but you can also do this using your WOF acrylic ruler and rotary cutter. Sew a strip to each end of the heart panel (approx 6.5" long, but I prefer to cut a little longer and then trim back). Press and then sew a strip to the top and the bottom of the heart panel (approx 10"). Press.

 Step 7: Cut your Backing Fabric and Batting slightly larger than your mug rug flimsy. Baste, and then quilt as desired. I decided to ditch stitch around the heart shape and then have a stab at some FMQ using SewCalGal's January FMQ Challenge design.

My attempt at FMQ!

 Step 8: Using the 2.5" Strip Die cut a WOF strip of your Binding Fabric. If you are using fat quarters you will need 2-3 strips. Join your strips using a 45 degree angle and press the seams open to reduce bulk. Press in half lengthwise, wrong sides together.

The bulk of the seam is spread between the two points.

 Step 9: Sew binding to the back of your mug rug using 1/4" seam. (There are lots of great binding tutorials floating around, Luv in the Mommy Hood has done a "round up" of a few different types)

Step 10: Press the binding forward, fold over to the front and pin so that the edge of the binding just covers the stitch line. I forget which blog I originally saw it on, but someone suggested using a decorative stitch to secure the binding to the front - it's fairly forgiving when compared to ditch stitching, and adds an extra level of interest to your design. I used a feather stitch as my machine is rather limited in it's stitch choices, but I liked the effect it gave.

And there you have it!

Your completed mug rug, ready to give to your sweetheart!

Mug rugs for the whole family!

Seriously though, I took one of these to school when I picked the kids up on Valentine's Day and when Blossom came out of her Kindy class I held it up and said "This is how much I love you!". She squealed with delight and asked if it was for her (which it wasn't, really.. I'd just gifted it to her Daddy!) so I said she could have one of my other ones.. She promptly showed it to anyone and everyone who would look.. the other Mums, her teachers, classmates, even the crossing guard! I did the same thing a few minutes later when I picked up Bean to a very similar response (less with the squealing and showing everyone, more with the heart clutching delight) - so I had to run home and finish off the binding on the other two mug rugs so they could have their own! They even slept with them.

I also made a matching table runner! I can post a tutorial for that if anyone's interested.

So what about this giveaway, you ask? Well.. for being so patient and bearing with me during my tutorial I am giving one lucky reader the chance to win a mug rug kit of your own! I will include pre-cut pieces to make the top including borders and the binding, all you will need is your batting and backing. Wait.. what good is one mug rug on Valentine's Day? Better make it enough for two <3

How do you win? Here's are ways you can win (you need to be a follower):

1. Tell me how you spent Valentine's Day. If you don't celebrate Valentine's Day, that's ok - tell me what you did instead! Or just leave a comment.

2. Follow me (and/or tweet about the giveaway) on Twitter.

3. Follow me on Pinterest.
4. Share this post on Facebook and/or blog it.

The winner will be selected using a Random Number Generator on Tuesday 21 February (10:00am Australian Western Standard Time) with the winner notified by email (and on this blog). Please make sure you're able to be contacted by providing an email address or making sure you're not a no-reply blogger :) International entries accepted.